SDS

MATERIAL SAFETY DATA SHEET
LR03 AAA (STANDARD) ALKALINE BATTERY 1.5V
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: LR03 AAA (STANDARD) ALKALINE BATTERY 1.5V
Manufacturer: ZHEJIANG MUSTANG BATTERY Co.,LTD
Add: No.818,Rongji Road, Luotuo, Zhenhai, Ningbo, China
Fax: [phone]
Emergency Phone: [phone]
2. Information on Ingredients
Product Nature:LR03 AAA (STANDARD) ALKALINE BATTERY 1.5V
Ingredient Concentration CAS No. EC No.
Manganese Dioxide 35.0% 1313-13-9 215-202-6
Zinc 15.5% 7440-66-6 231-175-3
Potassium hydroxi 5.0% 1310-58-3 215-181-3
Graphite 2.4% 7782-42-5 231-955-3
3.Hazards identification
Hazards Identification: The battery is not restricted to IATA DGR according to special
provision A123 and is not restricted to IMDG CODE according to special provision 304.
Emergency Overview: Avoid contact and inhalation the internal materials. Emit toxic
fumes under fire conditions.
4. First-aid measures
Skin Exposure: If the internal battery materials of an opened battery cell come into
contact with the skin,immediately flush with plenty of water.
Eye Exposure: In case of contact with eyes , flush with copious amounts of water for at
least 15 minuters.Assure adequate flushing by separating the eyelids with fingers.Call a
physician.
Inhalation Exposure: If potential for exposure to nickel fumes or dusts occurs,remove
immediately to fresh air and seek medcial attention.
Oral Exposure: If swallowed,do not induce vomiting. Seek immediate medical attention.
5.Fire-fighting measures
Extinguishing Media: Suitable:Dry chemical,Carbon dioxide and appropriate foam.
Firefighting:
Protective Equipment: Wear self-contained breathing apparatus and protective
clothing to prevent contact with skin and eyes.
Specific hazards: Emit toxic fumes under fire conditions.
6.Accidental release measures
Procedures of personal precautions:
Exercise appropriate precautions to minimize direct contact with skin and eyes.
Methods for cleaning up:
Sweep up with spade, place into a dry, clean, lidded container for disposal.Avoid raising
dust.Ventilate area and wash spill site after material pickup is complete.