OPERATOR’S MANUAL 140 Watt Power Inverter Model No. 28.71522 Read and follow all Safety Rules and Operating Instructions before Every Use of this Product. Save these instructions. Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
Table of Contents Section Page IMPORTANT SAFETY INSTRUCTIONS 2 Features 3 BEFORE USING YOUR POWER INVERTER 3 OPERATING INSTRUCTIONS 5 POWER SOURCE 5 LED INDICATOR AND SHUTDOWN PROTECTION 6 IF THE INVERTER FUSE BLOWS 6 Troubleshooting 7 SPECIFICATIONS 7 BEFORE RETURNING FOR REPAIRS 8 DieHard ONE-Year Full Warranty When operated and maintained according to all supplied instructions, if this DieHard product fails due to a defect in material or workmanship within 1 year from the date of
IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL. SAVE THESE INSTRUCTIONS – The 71522 offers a wide range of features to accommodate your needs. This manual will show you how to use your inverter safely and effectively. Please read, understand and follow these instructions and precautions carefully, as this manual contains important safety and operating instructions. The safety messages used throughout this manual contain a signal word, a message and an icon.
1. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Risk of electric shock or fire. 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 Keep out of reach of children. Keep the inverter well ventilated in order to properly disperse heat generated while it is in use. Make sure there are several inches of clearance around the top and sides and do not block the slots of the inverter. Make sure the inverter is not close to any potential source of flammable fumes, gases or clothing.
2. Features 1 2 1. USB Port 2. AC Outlet 3. 12 Volt Power Plug 3 3. BEFORE USING YOUR POWER INVERTER NOTE: This inverter is designed to be used with a single battery, up to group 31 type and 130 Ah or smaller in size. Do not use with any larger battery type. Do not use with multiple batteries connected in parallel. NOTE: Do not use the inverter with a product that draws a higher wattage than the inverter can provide, as this may cause damage to the inverter and product.
To calculate the continuous load: Continuous Load = AMPS x 120 (AC Voltage). Always run a test to establish whether the inverter will operate a particular piece of equipment or device. In the event of a power overload, the inverter is designed to automatically shut down. This safety feature prevents damaging the inverter while testing devices and equipment within the wattage range of the inverter. This inverter is designed to power 100 watt devices or less when used with the vehicle 12 volt accessory port.
4. OPERATING INSTRUCTIONS DC Outlet DC Plug 1. If connecting in a vehicle, remove the cigarette lighter from its outlet. 2. Push the 12-volt power plug firmly into the outlet. 3. The LED indicator light should glow GREEN verifying the inverter is receiving power. 4. Make sure the device to be operated is turned OFF. 5. Plug the device into the inverter AC outlet or USB port. 6. Turn the device on. 7. To disconnect, reverse the above procedure.
6. LED INDICATOR AND SHUTDOWN PROTECTION The LED glows GREEN automatically when plugged into a 12-volt DC source and will not glow under the following conditions: 1. When the power input from the vehicle’s battery drops to approximately 10.5-volts, low battery shutdown occurs and inverter shuts off. Solution: Recharge or Replace the battery. 2. When the power input from the vehicle’s battery exceeds 15.5-volts, high voltage protection occurs.
8. Troubleshooting PROBLEM LED does not light, or inverter does not function. 9. REASON SOLUTION Poor contact at terminals. Unplug and reinsert the 12-volt plug. Fuse Blown. See “IF THE INVERTER FUSE BLOWS” section. Inverter shutdown. See “LED INDICATOR AND SHUTDOWN PROTECTION” section. Inverter may not be working properly. See Warranty and call Customer Service 1-800732-7764 (Hours: 7:00 am – 5:00 pm CST).
10. BEFORE RETURNING FOR REPAIRS When an UNKNOWN OPERATING PROBLEM arises, please read the complete manual and call the customer service number for information that will usually eliminate the need for return. If the above solutions do not eliminate the problem or for information about troubleshooting or replacement parts, call toll-free from anywhere in the U.S.A.