ENGLISH DIGITAL MOVEMENT GUIDE BJ2679 DZ7187 - DZ7188 FL137EA DZ5175, DZ5176 MLL033 DZ5145, DZ5146 BJ2957 DZ7196, DZ7208, DZ7209 FL610AB, MLG367D DZ7118, DZ7119, DZ7120, DZ7121, DZ7169 - DZ7172, DZ7235, DZ7236 MLL-045 DZ7091, DZ7092, DZ7109, DZ7110, DZ7162, DZ7176, DZ7237, DZ7238 FO-001 DZ7206, DZ7207 (for digital display only) QAA-006, QAA-033 DZ7095, DZ7096, DZ7097, DZ7098, DZ7105, DZ7106, DZ7113, DZ7115, DZ7116, DZ7117, DZ7189 - DZ7190 F145GR3 DZ7069 - DZ7071, DZ7087, DZ7117 FO-002 DZ7076, DZ70
IMPORTANT TO KNOW! • When the watch is underwater or wet, never use the pushers/bezels, or set the time. Watch cases and metal bracelets should be rinsed thoroughly in fresh water after being in salt water. • No hot tub/sauna. Please do not take your DIESEL watch into the hot tub/sauna. The combination of extreme heat and water may cause your watch to lose some of its water-resistance. • No backward hand, or date, adjustments should be made when the analog hands read between 8pm and 3am.
Date Watch GL10, IS13, VJ32A11, VJ32A31, 9T13, 505.2-3, 515.1-3, 515.2-3, 585.2, 715-2, 2115, 2315 Date Setting 1. Pull the crown out to position 2. 2. Turn counter-clockwise and set the date for the previous day. (1) (2) (3) DATE Time Setting 1. 2. 3. 4. Pull crown out to setting 3. Turn counter-clockwise to advance the time and continue until the day/date changes to the present day. Set the correct time. Push crown back to position 1. Day/Date Watch IS02, 507.2-3, 517.
Two Eye Multifunction 6P25, 6P75 Date Setting 1. Pull crown out to position 2. 2. Turn counter-clockwise to select date. DATE DATE (1)(2) (3) (1)(2) (3) DAY DAY Day and Time Setting 1. To set time, pull crown out to position 3. 2. Turn clockwise to set hour and minute hands. The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have reached the desired day. 3. Push crown back to position 1. Multifunction 6P27 DATE TIME AND WEEKDAY SETTING DAY 1.
Chronograph Stopwatch OS10 (no date - OS30) (1 crown/2 pushers) MINUTE HAND TIME SETTING (A) HOUR HAND 1. Pull crown out to position 3. 2. Turn crown to set the desired time. 3. Return crown to position 1. (1) (2) (3) (B) SECOND HAND DATE SETTING 1. Pull crown out to position 2. 2. Turn crown counter-clockwise until the correct date is shown in the date window. 3. Return crown to position 1. CHRONOGRAPH OPERATION 1. Press A to start/stop the chronograph. 2. Press B for reset.
Chronograph OS60 (1 crown/2 pushers) MINUTE HAND SETTING THE TIME HOUR HAND 1. Pull the crown out to position 3. Chronograph second hand and 1/20 second hand will return to zero position. Do not return the crown to its normal position while the hands are returning to zero, or else the position the hands are at when this is done will be recognized as the new zero position. 2. Turn the crown to set the desired time. 3. Return the crown to its normal position.
Chronograph ISA 8161/202 MINUTE HAND (1 crown/2 pushers) (A) Setting the time SECOND HAND (1) (2) (3) 1. Pull crown out to position 3. 2. Set time by turning the crown. 3. Push the crown back to position 1. (B) DATE Setting the Date 1. Pull crown out to position 2. 2. Set date by turning the crown. 3. Push the crown back to position 1. Resetting Chronograph (after battery exchange or mishandling only) 1. 2. 3. 4. Press both A and B pushers at the same time. Next press B to reset the minutes.
Chronograph Stopwatch VD54 (with date - VD53) (1 crown/2 pushers) (A) 24-HOUR HAND Time and Date Setting 1. 2. 3. 4. 5. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. Pull crown out to position 2. Turn crown clockwise until the previous day’s date is displayed. Pull crown out to position 3 when the second hand is at the 12:00 position. Turn crown to set time.
Digital FL137AX / FL137EA / FL137AB SIMPLE ANALOG (1 crown) NORMAL TIME DISPLAY SIMPLE ANALOG (1 crown) 1. Press A to change display. Display sequence is time, calendar, seconds. 2. Press B to toggle 12/24-hour format. TIME AND DATE SETTING 1. 2. 3. 4. 5. (A) Press and hold B for 2 seconds to enter setting mode; year will begin flashing. Press A to advance digit; press and hold A for fast advance. Press B to set and advance to next setting value. Setting sequence is year, month, date, hour, minute.
Digital FL291 OVERVIEW Features include TIME/DATE, CHRONO, TIMER, ALARM, and LIGHT-UP EL. (A) (C) (B) (D) LIGHT-UP EL Press (A) to activate light-up function for 3 seconds. TIME OF DAY MODE - To set Time, press (B) until hour flashes. Use (C) and (D) buttons to select hour. Press (B) to advance. Press and hold (B) to complete set mode. - Press (C) to view the Time and Date Display. - Press and hold (C) to change the time from 12 hour to 24 hour. - Press (D) to toggle hourly chime.
Digital FDT003 / BD3000 Alarm Version FDT003 / BD3000 Mode Icon Legend OVERVIEW This instruction book is set-up to mirror the logic of the digital module. The features DUAL TIME, ALARM, CHRONOGRAPH and TIMER are described in the order they appear as in the module. Therefore almost all setting instructions fall under the OPTIONS section. Each mode of operation is covered in detail below; however, there are a number of unique innovations that need to be explained first.
CHIME When Chime is “on,” your watch will chime once on the hour every hour: A chime will also accompany mode changes, with a higher pitched chime signaling the TIME mode. 1. To set Chime “on or off,” press (B) till Options is activated. Press either (D) or (E) till “Alrms” is highlighted, press (A) to select. 2. Press either (D) or (E) till “Chime” is highlighted, press (A) to select. The Chime icon will activate indicating that the chime is on. (see Fig. 1) 3. Press (A) again to turn chime off.
Digital FL075AB SECOND AM DISPLAY MODES The digital portion of the module has (3) three display views which are selected by pressing (A). 1. While in TIME view, whether in 12 or 24 hour display is irrelevant, press (A) once and the DATE view will appear. 2. To have alternating views between TIME and DATE press (A) a second time and each view will display for 1 second. 3. To return to TIME only view press (A) for a third time. HOUR SETTING TIME/DATE MINUTE TIME DISPLAY MODE 1.
Digital QAA-006, QAA-033 NORMAL TIME DISPLAY 1. Press A for EL. 2. Press B to change mode. Mode sequence is time, time zone 2, alarm, timer. (A) Note: In any setting mode, if no pusher is operated for 10 seconds, all changes will be saved and the setting will automatically return to display mode. (B) TIME AND DATE SETTING 1. 2. 3. 4. 5. 6. 7. 8. 9. Press and hold A for 3 seconds to enter setting mode; 12/24-hour format will begin flashing. Press B to change 12/24-hour format.
Digital MD-FL298X, FL388, QFL226DB (B) (C) (A) (D) Alarm on Digital FL145GR3 (A) (C) (B) (D) Count stop Hourly chime on Count repeat Automatic EL Count up Key tone Chronograph MODE A SET/EL B MODE C START/STOP D LAP/RESET REAL TIME SET (hold for 2 seconds) TO CHRONOGRAPH TOGGLE TIME1/TIME2 KEY TONE ON/OFF TIME SETTING EXIT NEXT ADVANCE DECREMENT CHRONOGRAPH MEMORY RECALL TO TIMER START/STOP LAP/RESET MEMORY RECALL NEXT LAP TO TIMER TO CHRONOGRAPH TO CHRONOGRAPH TIMER
Digital FO-002 NORMAL TIME DISPLAY 1. 2. 3. 4. 5. Press B for EL. Press C to display date. Press D to display alarm. will be displayed for alarm on. Press C and D to toggle alarm on/off. Press A and D to toggle chime on/off. All weekdays will be displayed for chime on. (B) (C) (A) (D) TIME/DATE SETTING 1. 2. 3. 4. 5. 6. From normal time display, press A 3 times to enter setting mode; seconds will begin flashing. Press C to reset seconds to zero. Press D to advance to minutes.
LED Digital MLG-035 NORMAL TIME DISPLAY (A) 1. Press A to display time for 8 seconds. 2. Press A again (while display is on) to change mode. Mode sequence is time, date. Note: Animation will be displayed before time or date for 2 seconds. Note: If no pusher is operated for 8 seconds, settings will be saved and the display will return to normal time display. (B) TIME SETTING 1. Press A to display time. 2. Press and hold B, 12/24 hour format will begin flashing. 3. Press A to select 12/24 hour format.
Digital BJ2718, BJ2679, BJ2957 NORMAL TIME DISPLAY 1. Press A to change mode. Mode sequence is normal time, chronograph, alarm, and time setting. 2. Press B for EL. 3. Press C to display date. 4. Press D to display alarm. 5. Press A+D to toggle chime on/off. (all days of week will display for “on”.) 6. Press C+D to toggle alarm on/off. (B) (C) (A) (D) CHRONOGRAPH MODE 1. Press A to change to chronograph mode. 2. Press C to start/stop the chronograph. 3. Press D to reset to zero.
