Operation Manual

- 8 -
Digital BJ3170
NORMAL TIME DISPLAY
1. PressAtochangemode.Modesequenceis:normaltime,chronograph,alarm,timesetting.
2. PressBtodisplayalarm.
3. PressCtodisplaydate.
4. PressA+Btotogglechimeon/off(alldaysoftheweekwilldisplayfor“on”).
5. PressB+Ctotogglealarmon/off.Alarmwillsoundfor60seconds;pressBtosilencealarmorpressDforsnoozefunction
(alarmwillsound5minuteslater).
CHRONOGRAPH MODE
1. PressAtochangetochronographmode.
2. PressCtostart/stopthechronograph.
3. PressBwhenthechronographisstoppedtoreset.
NOTE: When the chronograph is running, press A to return to normal time display. Chronograph will continue to
count time.
SPLIT TIME
1. PressBwhilethechronographisrunning.
2. PressCtonalizetiming.
3. PressBtodisplayallcounts.
4. PressBagaintoreset.
ALARM MODE
1. PressAtochangetoalarmmode;hourwillbeginashing.
2. PressCtoincreasedigits;pressandholdCforfastadvance.
3. PressBtoadvancetominutes.
4. PressCtoincreasedigits;pressandholdCforfastadvance.
5. PressBtosavedata.
6. PressAtoexitandreturntonormaltimedisplay.
TIME AND DATE SETTING
1. PressAtochangetotimesettingmode;secondswillbeginashing.
2. PressCtoresetsecondstozero.
3. PressBtoadvancetominutes.
4. PressCtoincreasedigits;pressandholdCforfastadvance.
5. PressBtosetandadvancetonextsettingvalue.
6. Settingsequenceis:seconds,minute,hour,date,month,weekday.
NOTE: When setting the hour, “H” will display for 24-hour format, “A” or “P” will display for 12-hour format.
(A)
(B)
(C)
Chronograph Stopwatch VD54 (with date - VD53)
(1 crown/2 pushers)
TIME AND DATE SETTING
1. Beforesettingthetime,makesurethechronographisstoppedandsettozero(12:00)position.
2. Pullcrownouttoposition2.
3. Turncrownclockwiseuntilthepreviousday’sdateisdisplayed.
4. Pullcrownouttoposition3whenthesecondhandisatthe12:00position.
5. Turncrowntosettime.
Note: 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to
check that the 24-hour hand is set properly.
6. Returncrowntoposition1.
Note: When the crown is in position 2, do not press the pushers. Otherwise the chronograph hands will move.
CHRONOGRAPH
1. PressAtostart/stopthechronograph.
2. PressBtoresettozero.
SPLIT TIME
1. PressBwhilethechronographisrunning.
2. PressBagaintoreturntothechronograph.
3. PressAtofinalizetiming.
4. PressBtoreset.
CHRONOGRAPH ZERO RESET
1. Ifeitherofthechronographhandsisnotatthezero(12:00)position,pullcrownouttoposition3.
2. PressAtomovehandsclockwise;pressBtomovehandscounter-clockwise.
3. Returncrowntoposition1.
(B)
(A)
(1) (2)
(3)
24-HOURHAND
MINUTEHAND
SECONDHAND