Operation Manual

- 14 -
Digital QAA-006, QAA-033
NORMAL TIME DISPLAY
1. PressAforEL.
2. PressBtochangemode.Modesequenceistime,timezone2,alarm,timer.
NOTE: In any setting mode, if no pusher is operated for 10 seconds, all changes will
be saved and the setting will automatically return to display mode.
TIME AND DATE SETTING
1. PressandholdAfor3secondstoentersettingmode;12/24-hourformatwillbeginflashing.
2. PressBtochange12/24-hourformat.
3. PressAtosetandadvancetoseconds.
4. PressBtoresetsecondstozero.
5. PressAtosetandadvancetohour.
6. PressBtoincreasedigits;pressandholdBforfastadvance.
7. PressAtosetandadvancetonextsettingvalue.
8. Settingsequenceis12/24-hourformat,seconds,hour,minutes,year,month,date.
9. PressAtoexitsettingmode.
NOTE: Weekday will automatically update upon exiting setting mode.
TIME ZONE 2
1. PressBtochangetotimezone2.
2. PressandholdAfor3secondstoentersettingmode;hourwillbeginflashing.
3. PressBtoincreasedigit;pressandholdBforfastadvance.
4. PressAtosetandadvancetominutes.
5. PressBtoincreasedigit;pressandholdBforfastadvance.
6. PressAtoexitsettingmode.
ALARM MODE
1. PressBtochangetoalarmmode.
2. PressandholdBfor3secondstotogglealarm/chimeon/off.
3. Alarmwillsoundfor10seconds.Pressanypushertosilencealarm.
(A)
(B)
Digital G1, G3
NORMAL TIME DISPLAY
1. PressAtochangemode.Modesequenceisnormaltime,recall,alarm,andcountdowntimer.
2. PressandholdA3secondstotoggleautoELon/off.
3. PressBforEL.
4. PressCtotogglehourlychimeon/off.
5. PressDtoflashtimezone2.PressandholdD3secondstotogglenormaltimedisplay/time
zone2.
NOTE: In any mode, press and hold C 3 seconds to change to chronograph mode.
NOTE: At any point in any setting mode, press B to exit setting mode.
NOTE: In any setting mode, if no pusher is operated for 30 seconds, all changes will
be saved and the setting will automatically return to display mode.
TIME AND CALENDAR SETTING
1. Innormaltimedisplay,pressandholdB3seconds;hourwillbeginflashing.
2. PressCtoincreasedigit;pressDtodecreasedigit.PressandholdCorDforfast
increment/decrement.
3. PressAtosetandadvancetonextsettingvalue.
4. Repeatsteps2and3throughsettingsequence.Settingsequenceis:hour,minute,second,
year,month,date,12/24-hourformat,month/dateordate/monthformat.
5. PressBtoexitsettingmode.
6. TosetTimeZone2,pressandholdD3secondstochangetoTimeZone2.Thenusesteps
1-5toset.
NOTE: Weekday is automatically updated upon exiting setting mode.
RECALL MODE
1. PressAtochangetorecallmode.
NOTE: If no data is stored, display will show NO DATA. If data is saved, display will
show the current set (1-9).
2. PressCtotogglethroughsetdata:totaltime,besttime,averagetime,andeachlap(upto
100laps).
3. PressDtodisplaycurrentset;pressDagaintoscrolltonextset.
4. PressandholdD3secondstodeleteallstoreddatainthecurrentset.
NOTE: At any point in recall displays, press A to exit and change to alarm mode.
ALARM MODE
1. PressAtochangetoalarmmode.
2. PressCtotogglealarmon/off.
3. PressDtotogglealarm1/alarm2.
ALARM SETTING
1. Inalarmmode,pressandholdB3seconds;hourwillbeginflashing.
2. PressCtoincreasedigit;pressDtodecreasedigit.PressandholdCorDforfast
increment/decrement.
3. PressAtosetandadvancetonextsettingvalue.
4. Repeatsteps2and3throughsettingsequence.Settingsequenceis:hour,minute,timezone
1/timezone2.
5. PressBtoexitsettingmode.
NOTE: Alarm will sound for 20 seconds. Press any pusher to silence alarm.
(B)
(D)
(A)
(C)
COUNTDOWN TIMER
1. PressAtochangetotimermode.Defaultsettingis5minutes.
2. PressCtostarttimer;pressDtostopthetimer.
3. PressandholdD3secondstoclearthecountdownandresetthetimer.
NOTE: Alarm will sound for 20 seconds when countdown reaches zero. Press any
pusher to silence alarm.
TIMER SETTING
1. Intimermode,pressandholdB3secondstoentersettingmode;hourwillbeginflashing.
2. PressCtoincreasedigit;pressDtodecreasedigit.PressandholdCorDforfast
increment/decrement.
3. PressAtosetandadvancetonextsettingvalue.
4. Repeatsteps2and3throughsettingsequence.Settingsequenceis:hour,minute,seconds.
5. PressBtoexitsettingmode.
CHRONOGRAPH MODE
1. Inanymode,pressandholdC3secondstochangetochronographmode.
2. PressCtostartthechronograph;pressDtostopthechronograph.
3. PressandholdD3secondstoresettozero.
LAP COUNTING
1. PressCwhilethechronographisrunningforlapreading.
NOTE: If no other pusher is pressed after C is pressed, display will automatically show
total chronograph time after 5 seconds, then next lap running time after another 5
seconds.
2. PressBtoreturntochronographnextlap(upto100laps).
3. PressDtostopchronograph.
4. PressandholdB3secondstosavesetdata,orpressandholdD3secondstoresetto
zero.
NOTE: Upon saving, display will show next empty set available (1-9) or MEMORY
FULL. Change to Recall Mode to scroll through saved data.
ALARM SETTING
1. Inalarmmode,pressandholdAfor3secondstoentersettingmode;hourwillbegin
flashing.
2. PressBtoincreasedigit;pressandholdBforfastadvance.
3. PressAtosetandadvancetominute.
4. PressBtoincreasedigit;pressandholdBforfastadvance.
5. PressAtoexitsettingmode.
COUNTDOWN TIMER
1. PressBtochangetotimermode.
2. PressAtostart/stopthetimer.
3. Whentimerreacheszero,alarmwillsoundfor15seconds.Pressanypushertosilence
alarm.
TIMER SETTING
1. PressandholdAfor3secondstoentersettingmode;hourwillbeginflashing.
2. PressBtoincreasedigit;pressandholdBforfastadvance.
3. PressAtosetandadvancetonextsettingvalue.
4. Settingsequenceishour,minute,second.
5. PressAtoexitsettingmode.