Operation Manual

- 17 -
LED Digital MLG-035
NORMAL TIME DISPLAY
1. PressAtodisplaytimefor8seconds.
2. PressAagain(whiledisplayison)tochangemode.Modesequenceistime,date.
NOTE: Animation will be displayed before time or date for 2 seconds.
NOTE: If no pusher is operated for 8 seconds, settings will be saved and the display will return to normal time
display.
TIME SETTING
1. PressAtodisplaytime.
2. PressandholdB,12/24hourformatwillbeginflashing.
3. PressAtoselect12/24hourformat.
NOTE: In 12-hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m.
time.
4. PressBtosetandadvancetohour.
5. PressAtoadvancedigit;pressandholdAforfastadvance.
6. PressBtosetandadvancetonextsettingvalue.
7. Settingsequenceis:12/24hourformat,hour,minutes.
8. PressBtosaveandexitsettingmode.
DATE SETTING
1. PressAtoselectdatemode.
2. PressandholdB,datewillbeginflashing.
3. PressAtoadvancedigit;pressandholdAforfastadvance.
4. PressBtosetandadvancetomonth.
5. PressAtoadvancedigit;pressandholdAforfastadvance.
6. PressBtosaveandexitsettingmode.
(A)
(B)
OLED MODULE
Thedisplayisnormallyoff.Toactivatedisplay,pressAfordatedisplaywithscrollingtime(Figure1),orpressBfortime/date
displaywithanimation(Figure2).
NOTE: Animation is randomly selected from 4 designs. Press B to change animation.
TIME/DATE SETTING
1. Whenthedisplayisactivated,pressandholdAfor2secondstoentersettingmode.Hourwillbeginflashing.
2. PressBtoadvancedigit.PressandholdBforfastadvance.
3. PressAtosetandadvancetonextsettingvalue.
4. Settingsequenceishour,minute,month,date,year,12/24hourformat.
5. Aftertheminutehasbeenset,thesecondswillresettozero.
6. After12/24hourformathasbeenselected,settingswillbesavedandthedisplaywillautomaticallyreturntotimedisplay.
NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to time display.
(B)
(A)
Figure 1
Figure 2
(B)
(A)
Curved LED Digital MLL-045
NORMAL TIME DISPLAY
1. PressBfortimedisplayandanimation.
2. PressBagaintotoggletime/datemode.
3. Whentimeordateisdisplayed,pressandholdBfor3secondstotogglehorizontal/verticaldisplay.
TIME AND DATE SETTING
1. Fromtimedisplay,pressandholdA;12/24hourformatwillbeginflashing.
2. PressBtoselect12/24hourformat.
NOTE: In 12 hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m.
time.
3. PressAtosetandadvancetohour.
4. PressBtoadvancedigit.
5. PressAtosetandadvancetonextsettingvalue.
6. Settingsequenceis:12/24hourformat,hour,minutes,date,month.
7. PressAtosaveandexitsettingmode.
NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to normal time
display.
PERSONAL MESSAGE SETTING
1. PressBtodisplaytime,pressBagaintodisplaydate,pressandholdA;firstletterofmessagewillbeginflashing.
2. PressBtoselectcharacter.
3. PressAtosetandadvancetothenextcharacter.
4. Repeatstepsuntildesiredmessage.Pleasenotethereareonlytenspacesavailable.
(A)
(B)