Operation Manual

- 4 -
Three Eye Multifunction VX3J
(1 crown)
DATE SETTING
1. Pullcrownouttoposition2.
2. Turnclockwisetoadvancethedatehand.
3. Pushcrownbacktoposition1.
DAY AND TIME SETTING
1. Pullcrownouttoposition3.
2. Turnclockwisetoadvancehourandminutehands.
The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have
reached the desired day.
24-HOUR SUB-DIAL SETTING
The24-hourhandmovescorrespondinglywiththehourandminutehands.Whensettingthetimebesuretocheckthatthe
24-hourhandissetproperly.
(1) (2) (3)
DATE
24-HOUR
DAY
Multifunction 6P27
TIME AND WEEKDAY SETTING
1. Pullcrownouttoposition3,stoppingthesecondhandat12o’clock.
2. Turncrownclockwisetosetweekday(hour,minute,and24-hourhandswillalsomove).
NOTE: Do not set the day by turning the crown counter-clockwise, or the date may not change correctly.
3. Turnhourandminutehandsclockwisetosetthetime.Toensurethetimeissetaccurately,firstturntheminute-hand5
minutesaheadofthecorrecttime,thenturnback(counter-clockwise)tothecorrecttime.
4. Returncrowntoposition1.
NOTE: Make sure you have correctly set AM/PM time by checking the 24-hour hand.
DATE SETTING
1. Pullcrownouttoposition2.
2. Turncrowncounter-clockwisetosetdate.
NOTE: Do not set the date between 9:00 p.m. and 12:30 a.m. or the date may not change correctly.
(1) (2) (3)
DATE
DAY
24-HOURHAND
Chronograph 5020B
(1 crown/2 pushers)
DATE AND TIME SETTING
1. Pullcrownouttoposition2.
2. Turncounter-clockwiseandsetthedateforthepreviousday.
3. Pullcrownouttoposition3.Allchronographhandswillreturntozeroposition.Donotreturnthecrowntoitsnormal
positionwhilethehandisreturningtozero,orelsethepositionthehandisinwhenthisisdonewillberecognizedasthe
newzeroposition.
4. Turncrownclockwiseuntilcorrectdateisdisplayedindatewindow.
5. Turncrowntosetthetime.
6. Returncrowntoposition1.
CHRONOGRAPH OPERATION
1. PushAtostart/stopthechronograph.
2. PushBtoresetthechronograph.
SPLIT TIME MEASUREMENT
1. PressBwhilethechronographisrunning;timingwillcontinueinbackground.
2. PressBagaintostartthenextinterval;thethreechronographhandswilladvancetotheongoingmeasuredtime.
3. PressAtostopchronograph.
4. PressBtoreset.
CHRONOGRAPH ZERO RESET
1. Pullcrownouttoposition3.
2. PressandholdAandBsimultaneouslyfor2secondsuntilchronographsecondhandrotatesaroundthedial.
3. PressAtoresetthechronographsecondhandto12:00(zero)position.Eachpressadvancesthechronographsecondhand
onemark.IfAishelddownforover2seconds,thechronographsecondhandadvancescontinuously.
4. PressBtosetandadvancetothechronographminuteandhourhands.
5. Repeatstep3toresetchronographminuteandhourhands.
6. Returncrowntoposition1whenchronographhandsareresettozero.
(B)
(A)
(1) (2)
(3)
DATE
CHRONOGRAPHSECONDHAND
CHRONOGRAPHHOUR
ANDMINUTEHANDS
SECONDHAND
Two Eye Multifunction 6P25, 6P75
DATE SETTING
1. Pullcrownouttoposition2.
2. Turncounter-clockwisetoselectdate.
DAY AND TIME SETTING
1. Tosettime,pullcrownouttoposition3.
2. Turnclockwisetosethourandminutehands.Thehandshowingdaysoftheweekwillalsomovewiththehourandminute
hands.Keepturninguntilyouhavereachedthedesiredday.
3. Pushcrownbacktoposition1.
(1)
(2)
(3)
DAY
DATE
(1)
(2)
(3)
DAY
DATE