Operation Manual

ManualsBrandsDiesel ManualsAMJS10

ENGLISH

IMPORTANT TO KNOW!

• When the watch is underwater or wet, never use the pushers/bezels, or set the time. Watch cases

and metal bracelets should be rinsed thoroughly in fresh water after being in salt water.

• No hot tub/sauna. Please do not take your DIESEL watch into the hot tub/sauna. The combination of

extreme heat and water may cause your watch to lose some of its water-resistance.

• No backward hand, or date, adjustments should be made when the analog hands read between 8pm

and 3am. At these times, the gears are too close together and such a change could cause damage.

Summary of content (11 pages)

PAGE 1
ENGLISH IMPORTANT TO KNOW! • When the watch is underwater or wet, never use the pushers/bezels, or set the time. Watch cases and metal bracelets should be rinsed thoroughly in fresh water after being in salt water. • No hot tub/sauna. Please do not take your DIESEL watch into the hot tub/sauna. The combination of extreme heat and water may cause your watch to lose some of its water-resistance. • No backward hand, or date, adjustments should be made when the analog hands read between 8pm and 3am.
PAGE 2
Resistance to Water Water Resistance Caseback Marking Water-Related Use Depth Washing Hands — Shower, Bathing Swimming, Snorkeling Scuba Diving — WR — 3 ATM 3 Bar, 30 Meters 5 ATM 5 Bar, 50 Meters 10 ATM 10 Bar, 100 Meters 20 ATM 20 Bar, 200 Meters 30 ATM 30 Bar, 300 Meters 50 ATM 50 Bar, 500 Meters Always set the crown in closed position (the normal position). Tighten screw-lock crown completely.
PAGE 3
Date Watch 515.2-3, 2117, 2317, VX42EZ-D Date Setting 1. Pull crown out to position 2. 2. Rotate counter-clockwise to set date. 3. Return crown back to position 1. 1 2 3 Time Setting 1. Pull crown out to position 3. 2. Rotate counter-clockwise to set time. 3. Return crown to position 1. DATE Day/Date Watch 2305 Date Setting 1. Pull crown out to position 2. 2. Rotate clockwise to set date. 3. Return crown back to position 1.
PAGE 4
Chronograph JS15, JS16, JS26, JS10 24-HOUR HAND A CHRONOGRAPH MINUTE HAND CHRONOGRAPH MINUTE HAND 1 2 3 1 2 3 CHRONOGRAPH SECOND HAND B A CHRONOGRAPH SECOND HAND B 24-HOUR HAND DATE SETTING 1. Pull crown out to position 2. 2. Rotate clockwise to set date. 3. Return crown back to position 1. time SETTING 1. Pull crown out to position 3. 2. Rotate clockwise to set time. 3. Return crown to position 1. CHRONOGRAPH 1. Press A to start/stop the chronograph. 2. Press B to reset to zero.
PAGE 5
Chronograph Stopwatch VD57B 1/10 SECOND HAND A MINUTE HAND 1 2 3 SECOND HAND B Date Setting (on some models only) 1. Pull crown out to position 2. 2. Rotate clockwise to set date. 3. Push crown back to position 1. Time Setting 1. Pull crown out to position 3. 2. Rotate clockwise to set time. 3. Return crown to position 1. Using the Stopwatch 1. Press A to start/stop the stopwatch. 2. Press B to control the split time and reset. Stopwatch Hand Adjustment 1. Pull crown out to position 3. 2.
PAGE 6
Chronograph VD51B DATE SETTING 1. Pull crown out to position 2. 2. Rotate the crown clockwise until the preview day’s date appears. 3. Return crown to position 1. TIME SETTING 1. Pull crown out to position 2 when the second hand is at the 12 o’clock position. 2. Rotate crown to set time. 3. Return crown to position 1. SECOND HAND A MINUTE HAND B 1 2 3 USING THE STOPWATCH 1. Press A to start/stop the stopwatch. 2. Press B to control split time and reset.
PAGE 7
Chronograph VD53, VD53B, VR32A25 DATE SETTING 1. Pull crown out to position 2. 2. Rotate clockwise to set date. 3. Return crown back to position 1. TIME SETTING 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. Pull crown out to position 3. 3. Rotate crown clockwise to set time. 4. Return crown to position 1. A 24-HOUR HAND MINUTE HAND SECOND HAND 1 2 3 B Chronograph 1. Press A to start/stop the chronograph. 2. Press B to reset to zero. Split Time 1.
PAGE 8
Automatic 8N24-N-LR-DZ, NH38A3M HOUR HAND MINUTE HAND 1 2 SECOND HAND WINDING THE MAINSPRING 1. Rotate the crown clockwise at position 1. Wind approximately 10 times clockwise and it will start to move naturally. TIME SETTING 1. Pull the crown out to position 2. 2. Rotate crown to set time. 3. Return crown back to position 1.
PAGE 9
Digital FL137AX, FL137AB, QFOX21CA, QFOX21CB, QFOX21BB A B A A FL137AB B FL137AX QFOX21CA QFOX21CB B QFOX21BB OVERVIEW Features include CALENDAR and TIME. NORMAL TIME DISPLAY 1. Press A to change display. Display sequence is time, calendar, seconds. 2. Press B to toggle 12/24-hour format. TIME AND DATE SETTING 1. Press and hold B for 2 seconds to enter setting mode; year will begin flashing. 2. Press A to advance digit; press and hold A for fast advance. 3.
PAGE 10
Digital QFO-015-AA A D B C OVERVIEW Features include CALENDAR, ALARM, 12/24H FORMAT, CHRONO, TIMER, DUAL TIME, EL BACKLIGHT. TIME SETTING 1. Press and hold C for 2 seconds to enter setting mode; seconds will begin flashing. 2. Press B to set and advance to next setting value. 3. Setting sequence is second, minute, hour 12/24H format, month, day, week. 4. Press D to advance the flashing digit. 5. Press C to exit setting mode.
PAGE 11
CHRONOGRAPH 1. Press D to start/stop chronograph. 2. When stopped, press C to return to zero. 3. When running, press C to split count, then press D to exit split count and C to return to zero. 4. Press B to return to time. TIMER MODE 1. The display range of the timer is 23 hours, 59 minutes and 59 seconds. 2. Press D to start/stop the timer. Press C to return to starting value. 3. Timer sounds for 10 seconds when counting down to 00:00:00.