Operation Manual

English

Press PREVIOUS/NEXT button to change the EQ mode and press

MENU/CONFIRM button to confirm the EQ mode.

The setting of EQ mode is able to apply in Playing Song and Playing Recorded

Voice mode.

Changing Playing Rate

1. In PLAYING mode, press MENU/CONFIRM button and select Tempo Rate

to enter the sub menu.

2. Press PREVIOUS/NEXT button to adjust the playing rate of a song. A status

bar will be shown on the display.

Note: This feature only supports in MP3 song while it doesn’t support in WMA song.

A-B Repeat

1. In PLAYING mode, press MENU/CONFIRM button and select Replay sub

menu to enable A-B Repeat function.

2. The mark A is flashing on the display and waiting for setting. Press

PREVIOUS/NEXT to set the mark A. Mark A is set if flashing of Mark A

stops.

3. The mark B is flashing on the display and waiting for setting. Push

MENU/CONFIRM button rightward to set the mark B. Mark B is set if

flashing of Mark B stops.

4. The music between mark A and mark B will be repeated once

You may stop the playing until you press MENU/CONFRIM button to disable

A-B Repeat function.

Replay Times

Note: This function is workable when the A-B Repeat is enabled.

In PLAYING mode, press MENU/CONFIRM button and select Replay Times to

enter the sub-menu. The number of replay times can be adjusted.

Replay Gap

Note: This function is workable when the A-B Repeat and Replay Time are enabled.

In PLAYING mode, press MENU/CONFIRM button and select Replay Gap to enter

the sub-menu. The idle duration between mark A and mark B can be adjusted.

Note: Refer to Overview section for detailed buttons operation.