User's Manual
Table Of Contents
- About the Modules
- What’s on the Module?
- About the Development Board
- Basic description
- Switches and buttons
- I2C and SPI header connectors
- Serial port connectors
- VGA connector / External LCD clock
- Development board SO-DIMM connector, P15
- Application-specific expansion headers - P16 and P17
- LCD application board header, P18
- USB Device application header, P32
- Digital I/O, P19
- Power over Ethernet (PoE) connectors
- Through-hole prototyping (wrap-field) area, P3 and P4
- Development board LEDs
- Current Measurement Option (CMO)
- Power jack, P12
- Test points
- Factory default interface configuration for development board
- LCD and USB Configuration
- Module Specifications
- Mechanical dimensions
- Environmental information
- Network interface
- Power requirements
- Real-time clock
- I2C signals
- USB interface
- Module reset
- Module / SO-DIMM signal characteristics
- Electrical characteristics
- DC electrical characteristics
- USB internal PHY DC electrical inputs and outputs
- Antenna information
- Antenna specifications - 2 dBi Dipole
- Antenna specifications - 5 dBi Dipole
- Antenna specifications - 2 dBi PCB mount
- FCC RF radiation exposure statement
- Safety statements
- Dimensions and PCB Layouts
- Certifications
. . . . .
ABOUT THE DEVELOPMENT BOARD
VGA connector / External LCD clock
www.digiembedded.com 39
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VGA connector / External LCD clock
VGA connector,
P6
The VGA connector is a 15-pin female connector, labeled P6.
P6 pin assignment
External
LCD clock,
G1
VGA
connector,
P6
Pin Signal Comment
1 VGA_RED
2 VGA_GREEN
3 VGA_BLUE
4 NC (Monitor ID2) Monitor ID2 is not implemented on the
development board
5GND
6 VGA_GND (RED_RETURN)
7 VGA_GND (GREEN_RETURN)
8 VGA_GND (BLUE_RETURN)
9NC