User's Manual
Table Of Contents
ABOUT THE DEVELOPMENT BOARD
JTAG
22 Connect Wi-Wave Hardware Reference, Rev B 9/2007
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JTAG
Pinout The development board provides a 20-pin JTAG header, P200. The pins are allocated
as shown:
JTAG header, P200
Pin Signal Pin Signal
1 +3.3V 2 +3.3V
3 No connect 4 GND
5 JTAG TDI 6 GND
7 JTAG TMS 8 GND
9 JTAG TCK 10 GND
11 No connect 12 GND
13 JTAG TDO 14 GND
15 RST# TRIGGER 16 GND
17 No connect 18 GND
19 No connect 20 GND