User's Manual

. . . . .
ABOUT THE DEVELOPMENT BOARD
USB peripheral interface
www.digiembedded.com 23
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB peripheral interface
USB peripheral
jack, J4
The USB Type B connector, J4, is the primary communications interface to the
development board. The USB bus is routed from the USB peripheral jack to the
appropriate module connector pins.
Important The development board does not use USB power. You must always use the input
power jack, J1, to power the development board.
USB peripheral jack,
J4