User's Manual

ABOUT THE DEVELOPMENT BOARD
U.FL and RP-SMA connectors
26 Connect Wi-Wave Hardware Reference, Rev B 9/2007
2 Attach the other end of the cable(s) to the U.FL connector(s) on the
development board.
3 Attach the RP-SMA antenna to the appropriate RP-SMA connector on the
development board.
RP-SMA
connectors
If you are using only one cable/connection, be sure you attach the RP-SMA antenna to
the correct connector:
 If the cable is connected to U.FL connector P11, or WiFi antenna 1, attach the
RP-SMA antenna to J11.
 If the cable is connected to U.FL connector P12, or WiFi antenna 2, attach the
RP-SMA antenna to J12.
For more
information
For information about the antenna(s) and using it, see Chapter 3, “Using the
Antenna.”