User's Manual

What’s on the module?
10 Connect Wi-Wave Hardware Reference, Rev. B, 9/2007
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What’s on the module?
Connect Wi-Wave
module edge
connector
The Connect Wi-Wave module edge connector is a 52-pin connector whose pinout
follows the standard PCI Express Mini Card edge connector pinout as stated in the
PCI Express Mini Card Electromechanical Specification, Revision 1.1, with this
exception: JTAG signals are mapped onto pins 45, 47, 49, and 51. These signals are
reserved and not intended for user applications.
Connect Wi-Wave
module edge
connector: Pinout
The module edge connector is configured as shown (signal direction w.r.t Wi-Wave):
U.FL connectors
P1P2
Edge connector, P3
Pin Type WLAN Mini Card
signal
Pin Type WLAN Mini Card
signal
1 n/a No connect 2 In Vcc_3.3
3 n/a No connect 4 In GND
5 n/a No connect 6 n/a No connect
7 n/a No connect 8 n/a No connect
9 In GND 10 n/a No connect