User's Manual

RF Exposure Statement
56  Digi Connect Wi-EM 9210 Hardware Reference
RF Exposure Statement
The Digi Connect Wi-EM 9210 module complies with the RF exposure limits for humans
as called out in RSS-102. It is exempt from RF evaluation based on its operating frequency
of 2.4 GHz, and effective radiated power less than the 3 watt requirement for a mobile
device (>20 cm separation) operating at 2.4 GHz.
Safety Statements
To avoid contact with electrical current:
 Never install electrical wiring during an electrical storm.
 Use a screwdriver and other tools with insulated handles.
 You and those around you should wear safety glasses or goggles.
 Installation of inside wire may bring you close to electrical wire, conduit,
terminals and other electrical facilities. Extreme caution must be used to avoid
electrical shock from such facilities. You must avoid contact with all such
facilities.
 Protectors and grounding wire placed by the service provider must not be
connected to, removed, or modified by the customer.
 Do not touch or move the antenna(s) while the unit is transmitting or receiving.
 Do not hold any component containing a radio such that the antenna is very
close to or touching any exposed parts of the body, especially the face or eyes,
while transmitting.
 Do not operate a portable transmitter near unshielded blasting caps or in an
explosive environment unless it is a type especially qualified for such use
Any external communications wiring you may install needs to be constructed to all
relevant electrical codes. In the United States this is the National Electrical Code Article
800. Contact a licensed electrician for details.