Reference Manual

113 ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference
Chapter 2
22 I/O CAMPCLK CAMPCLK
GPJ8
Pixel clock, driven
by the camera
processor, input
with pull-up
enabled
Connected to X28
23 I/O CAM_HREF CAM_HREF
GPJ10
Horizontal Sync,
driven by the
camera processor,
input with pull-up
enabled
Connected to X28
24 I/O TxD2 TxD2
GPH4
Configured to
TxD2
TxD2 connected to COMC,
X19
25 I/O RxD2 RxD2
GPH5
Configured to
RxD2
TxD2 connected to COMC,
X19
26 I/O RTS2# RTS2#
GPH6
TxD3
Configured to
RTS2#, could also
be used as TxD3
Connected to J4
27 I/O CTS2# CTS2#
GPH7
RxD3
Configured to
CTS2#, could also
be used as RxD3
Connected to J7
28 I/O CAMVSYNC CAMVSYNC
GPJ9
Frame Sync,
driven by the
camera processor,
input with pull-up
enabled
Connected to X28
29 I/O CAMDATA0 CAMDATA0
GPJ0
Pixel Data driven
by camera
processor, input
with pull-up
enabled
Connected to X28
30 I/O CAMDATA1 CAMDATA1
GPJ1
Pixel data driven
by the camera
processor, input
with pull-up
enabled
Connected to X28
31 I/O CAMDATA2 CAMDATA2
GPJ2
Pixel data driven
by the camera
processor, input
with pull-up
enabled
Connected to X28
32 I/O CAMDATA3 CAMDATA3
GPJ3
Pixel data driven
by the camera
processor, input
with pull-up
enabled
Connected to X28
X1 Type U-Boot Module
Functionality
Comments Usage on
development board