Reference Manual

115 ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference
Chapter 2
46 I CF_CD# CF_CD#
GPG10
EINT18
Configured as
input, pull-
up/interrupt
disabled
Card detect CF_CD when Add
on Board is applied
47 - I GPG3
EINT11
Configured as
input, pull-
up/interrupt
disabled
Not used, connected to
X11;C12
48 I/O VD10 VD10
GPD2
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
49 I/O VD11 VD11
GPD3
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
50 I/O VD12 VD12
GPD4
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
51 I/O VD13 VD13
GPD5
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
52 I/O VD14 VD14
GPD6
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
53 I/O VD15 VD15
GPD7
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
54 I - GPG6
EINT14
Configured as
input, pull-up
enabled
Not used, connected to
X10;B14
55 I - GPB4
TCLK0
Configured as
input
Not used, connected to
X11;C14
56 I/O VD18 GPB4
TCLK0
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
57 I/O VD19 VD19
GPD11
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
58 I/O VD20 VD20
GPD12
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
59 I/O VD21 VD21
GPD13
Configured as
output, pull-up
enabled
Connected to LCD
Application Header X5
X1 Type U-Boot Module
Functionality
Comments Usage on
development board