Reference Manual

. . . . .
www.ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference.com 122
17 O A13 RADDR13 Not used
18 O A14 RADDR14 Used as address of ETH-Contr.
on module
Not used
19 O A15 RADDR15 Not used Not used
20 O A16 RADDR16
GPA1
should not be used as I/O pin
for compatibility
Not used
21 O A17 RADDR17
GPA2
should not be used as I/O pin
for compatibility
Not used
22 O A18 RADDR18
GPA3
should not be used as I/O pin
for compatibility
Not used
23 O A19 RADDR19
GPA4
should not be used as I/O pin
for compatibility
Not used
24 O A20 RADDR20
GPA5
should not be used as I/O pin
for compatibility
Not used
25 O A21 RADDR21
GPA6
should not be used as I/O pin
for compatibility
Not used
26 O A22 RADDR22
GPA7
should not be used as I/O pin
for compatibility
Not used
27 O A23 RADDR23
GPA8
should not be used as I/O pin
for compatibility
Not used
28 O A24 RADDR24
GPA9
should not be used as I/O pin
for compatibility
Not used
29 O A25 RADDR25
GPA10
should not be used as I/O pin
for compatibility
Not used
30 O - Pull down Not used
31 - RXD1 RXD1
GPH3
PortB RxD Connected to PortB MEI
32 - TXD1 TXD1
GPH2
PortB TxD Connected to PortB MEI
33 - CTS1# CTS1#
GPH10
Port CTS Connected to PortB MEI
34 - RTS1# RTS1#
GPH11
Port RTS Connected to PortB MEI
35 - - Not connected
36 I/O I XDREQ0#
GPB10
Configured as input, pull-up
enabled
Not used
37 I/O I XDREQ1#
GPB8
Configured as input, pull-up
enabled
Not used
X2 Typ
e
U-
Boot
Module
Functionality
Comments Usage on
development board