Reference Manual

125 ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference
Chapter 2
67 O - LEDLNK Ethernet 0 Line/Activity LED
High, when link ok Low, while
active
Connected to Link/Activity
LED
68 I - TPIP Ethernet 0 Input+
100R differential termination
on module
Connected to X7 RJ45 with
integrated magnetics
69 O - LEDH0 speed LED Connected to X7 RJ45 LED
70 O - TPON Ethernet 0 output- 100R
differential termination on
module
Connected to X7 RJ45 with
integrated magnetics
71 I/O - ETHGPIO2/LED
3
Full duplex LED/IO Not connected
72 O - TPOP Ethernet 0 Output+ 100R
differential termination on
module
Connected to X7 RJ45 with
integrated magnetics
73 O GPA11 OE_CF#
GPA11
Compact FLASH signal Not used.
74 O GPA15 WE_CF#
GPA15
Compact FLASH signal Not used.
75 I GPG11 EINT19
IREQ_CF#
GPG11
Compact FLASH signal Not used.
76 I GPG12 EINT20
INPACK#
GPG12
Compact FLASH signal Not used.
77 O GPG13 EINT21
REG_CF#
GPG13
Compact FLASH signal Not used.
78 O GPG14 EINT22
RESET_CF
GPG14
Compact FLASH signal Not used.
79 O GPG15 EINT23
CF_PWREN
GPG15
Compact FLASH signal Not used.
80 P - GND GND
81 I/O D0 RDATA0 Data Bus Connected to X33 Peripheral
Application Header
82 I/O D1 RDATA1 Connected to X33 Peripheral
Application Header
83 I/O D2 RDATA2 Connected to X33 Peripheral
Application Header
X2 Typ
e
U-
Boot
Module
Functionality
Comments Usage on
development board