Reference Manual

135 ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference
Appendix B
Note: The higher VLIO current of 400 MHz variant due to speed grade specific
S3C2443 PLL voltage requirements.
 U-Boot
– U-Boot idle; waiting for serial input
– 100 Mbit Ethernet connection idle
– All peripherals provided with clock signals, but not initialized
 Windows Embedded CE
– Windows Embedded CE idle
– 100 Mbit Ethernet connection idle
– All peripherals except camera and sound provided with clock signals and
initialized
 Ethernet Reset
– Windows Embedded CE idle
– 100 Mbit Ethernet connection idle
– All peripherals except camera and sound provided with clock signals and
initialized
– Ethernet controller held in reset (GPIO GPA13/ETH_RST# low)
 Suspend (CPU in SLEEP mode)
– Windows Embedded CE
– Ethernet deactivated
– All peripheral and CPU clocks stopped, all SoC IP blocks deactivated
 Wireless Receive
– Wireless interface initialized, receive only
– Windows Embedded CE idle
– 100 Mbit Ethernet connection idle
– All peripherals except camera and sound provided with clock signals and
initialized
Suspend 83mA 90mA 571mW 95mA 72mA 552mW
Wireless
Receive
247mA 346mA 1957mW 300mA 352mA 2152mW
Wireless
Transmit
280mA 705mA 3251mW 300mA 673mA 3211mW
533MHz 400MHz