Reference Manual

61 ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference
Chapter 1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuration pins - CPU
The following configuration pins are hardwired on the module: Default module CPU
configuration.
x = don't care
OM0 is fixed to GND for setting XTAL.
OM4 is fixed to GND for setting NAND.
OM1-3 are depending of the FLASH type.
No pins are available on the module connectors.
MCONF0
(GPF3)
MCONF1
(GPF4)
MCONF2
(GPM0)
MCONF3
(GPF2)
MCONF4
(GPH12)
SDRAM-Type 16 MB00xxx
32 MB01xxx
64 MB10xxx
128 MB11xxx
SDRAM-CL 2 xx00x
3 xx01x
4 xx10x
5 xx11x
CPU 400 MHzxxxx0
533 MHzxxxx1