Reference Manual

. . . . .
www.ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference.com 62
About the Development Board
CHAPTER 2
The ConnectCore 9M 2443 Development Board supports the ConnectCore 9M 2443
and ConnectCore Wi-9M 2443 module. This chapter describes the different
components of the development board, which provides the following main features:
What’s on the
development
board?
 RJ-45 Ethernet Connector
 Connectors for Digi 802.3af PoE application board (sold separately)
 1 x UART RS232 with status LEDs and SUB-D 9-pin connector
 1 x UART MEI (RS232/RS4xx) with status LEDs and SUB-D 9-pin connectors
 2 x UART with TTL levels
 USB Host Connector
 USB Device Connector
 SPI, I2C headers
 LCD Application Connector with Touch Screen Interface
 VGA interface
 2 x User LEDs (green)
 2 x User Keys
 1 x Debug LED
 Screw-flange connector for GPIO
 Peripheral application header 0
– Including access to 16-bit data /10-bit address bus signals
 Connectors with 1:1 copies of module pins
 Eight-position configuration DIP switch
 Flexible 9-30VDC power supply
 Test points and current measurement options (+3.3V & 5V)
 3V coin cell battery
 JTAG connector