User Manual
Table Of Contents
- About the ConnectCore® 6UL
- Module specifications
- Assembly instructions
- Moisture sensitivity and shelf life
- Mounting
- Solder paste print
- Stencil
- Coplanarity
- SMT pick and place
- SMT process parameter reference - for both castellation and LGA applications
- Reflow profiles using a ten-zone oven, SAC 305 lead-free solder paste (Alpha ...
- Vapor Phase Profile Recommendation Using IBL 309 Batch Soldering Machine, SAC...
- Vapor Phase IBL 309 batch soldering machine settings
- Conformal coating
- Certifications
Module specifications Power consumption
ConnectCore® 6UL Hardware Reference Manual
120
Run-time modes
Run-time
IDLE Display connected (IDLE) Decoding video CPU stress
Whole module 0.635 W 0.649 W 0.868 W 0.840 W
MCA 20 mW
Note These power consumption numbers should be considered guidelines only, never as fixed or
absolute values. Actual values will depend entirely upon individual setup and system application.
Power consumption: Wireless power consumption increase
The following tables shows the power consumption increase of the ConnectCore 6UL module when
transmitting in 2.4 GHz and 5 GHz modes:
2.4 GHz modes Power (dBm) Continuous Tx (99%)
11b 1 Mbps 20MHz 18 1.123 W
11b 11 Mbps20MHz 18 1.086 W
11g 6 Mbps20MHz 18 0.991 W
11g 54 Mbps20MHz 18 0.783 W
11g/n MCS020MHz 18 0.976 W
11g/n MCS720MHz 15 0.643 W
11g/n MCS0 40MHz 17 0.932 W
11g/n MCS7 40MHz 15 0.552 W
5 GHz modes Power (dBm) Continuous Tx (99%)
11a 6 Mbps20MHz 13 1.095 W
11a 54 Mbps20MHz 11 0.801 W
11a/n MCS020MHz 13 1.083 W
11a/n MCS720MHz 10 0.743 W
11a/n MCS0 40MHz 12 1.052 W
11a/n MCS7 40MHz 9 0.636 W
11ac MCS020MHz 13 1.097 W
11ac MCS720MHz 10 0.712 W
11ac MCS820MHz 9 0.672 W