User Manual
Table Of Contents
- About the ConnectCore® 6UL
- Module specifications
- Assembly instructions
- Moisture sensitivity and shelf life
- Mounting
- Solder paste print
- Stencil
- Coplanarity
- SMT pick and place
- SMT process parameter reference - for both castellation and LGA applications
- Reflow profiles using a ten-zone oven, SAC 305 lead-free solder paste (Alpha ...
- Vapor Phase Profile Recommendation Using IBL 309 Batch Soldering Machine, SAC...
- Vapor Phase IBL 309 batch soldering machine settings
- Conformal coating
- Certifications
Module specifications Environmental specifications
ConnectCore® 6UL Hardware Reference Manual
125
Digi SMTplus™ Castellated Edge Via mounting
Weight
The weight of the ConnectCore 6UL module (with Wi-Fi/BT networking and shield) is 6.45g.
Environmental specifications
n Operating temperature: -40 to 85C.
n The ConnectCore 6UL module shall be built in an enclosure so that the shield is not accessible
to the end-user.
Socket options
For testing, prototyping, and other primarily development-related purposes, Digi International and E-
tec Interconnect AG have developed sockets allowing the easy insertion and removal of modules in a
carrier board design. Socket models for both LGA and castellated via use cases are available.