User Manual
Table Of Contents
- About the ConnectCore® 6UL
- Module specifications
- Assembly instructions
- Moisture sensitivity and shelf life
- Mounting
- Solder paste print
- Stencil
- Coplanarity
- SMT pick and place
- SMT process parameter reference - for both castellation and LGA applications
- Reflow profiles using a ten-zone oven, SAC 305 lead-free solder paste (Alpha ...
- Vapor Phase Profile Recommendation Using IBL 309 Batch Soldering Machine, SAC...
- Vapor Phase IBL 309 batch soldering machine settings
- Conformal coating
- Certifications
About the ConnectCore® 6UL Wireless interfaces
ConnectCore® 6UL Hardware Reference Manual
22
5 GHz band
channel # Center frequency (MHz) EUROPE (ETSI) NORTH AMERICA (FCC) JAPAN
140 5700 DFS / TPC DFS DFS / TPC
149 5745 SRD ✔ No Access
153 5765 SRD ✔ No Access
157 5785 SRD ✔ No Access
161 5805 SRD ✔ No Access
165 5825 SRD ✔ No Access
Note
DFS = Dynamic Frequency Selection
TPC = Transmit Power Control
SRD = Short Range Devices 25 mW max power
Transmit power
The following table lists nominal transmit power values for the ConnectCore 6UL module.
RF band Channel BW Standard Output power (dBm)
2.4 GHz 20 MHz 802.11b 18 (1Mbps) - 18 (11Mbps)
20 MHz 802.11g 18 (6Mbps) - 14 (54Mbps)
20 MHz 802.11n/ac 17 (MCS0) - 13 (MCS7)
40 MHz 802.11n/ac 15 (MCS0) - 13 (MCS7)
5 GHz 20 MHz 802.11a 13 (6Mbps) - 11 (54Mbps)
20 MHz 802.11n/ac 15 (MCS0) - 8 (MCS7)
40 MHz 802.11n/ac 12 (MCS0) - 7 (MCS7)
80 MHz 802.11ac 9 (MCS0) - 4 (MCS7)
Note Nominal powers are subject to regulatory domain regulations.
Note Due to manufacturing tolerance these nominal output powers may be reduced up to 3 dB.
Receiver sensitivity
The following table lists typical receive sensitivity values for the ConnectCore 6UL module.