User Manual
Table Of Contents
- About the ConnectCore® 6UL
- Module specifications
- Assembly instructions
- Moisture sensitivity and shelf life
- Mounting
- Solder paste print
- Stencil
- Coplanarity
- SMT pick and place
- SMT process parameter reference - for both castellation and LGA applications
- Reflow profiles using a ten-zone oven, SAC 305 lead-free solder paste (Alpha ...
- Vapor Phase Profile Recommendation Using IBL 309 Batch Soldering Machine, SAC...
- Vapor Phase IBL 309 batch soldering machine settings
- Conformal coating
- Certifications
About the ConnectCore® 6UL Module pinout - general layout
ConnectCore® 6UL Hardware Reference Manual
34
l White cells: LGA pads
l Orange cells: castellated pads
Note Pad A1 is unconnected. This pad is meant for module-orientation purposes; its shape is square,
whereas all other pads are circular. Pad A1 should not be soldered down to a corresponding pad on
the carrier board.