User Manual
Table Of Contents
- About the ConnectCore® 6UL
- Module specifications
- Assembly instructions
- Moisture sensitivity and shelf life
- Mounting
- Solder paste print
- Stencil
- Coplanarity
- SMT pick and place
- SMT process parameter reference - for both castellation and LGA applications
- Reflow profiles using a ten-zone oven, SAC 305 lead-free solder paste (Alpha ...
- Vapor Phase Profile Recommendation Using IBL 309 Batch Soldering Machine, SAC...
- Vapor Phase IBL 309 batch soldering machine settings
- Conformal coating
- Certifications
ConnectCore® 6UL Hardware Reference Manual 49
Castellated
pad
ConnectCore
6UL pad
ConnectCore 6UL
signal name
i.MX6UL
pad name Multiplexing
Power
group Comments
50 / J21 CPAD50 ENET1_RX_ER
ENET1_RX_
ER
ALT0: ENET1_RX_ER
ALT1: UART7_RTS_B
ALT2: PWM8_OUT
ALT3: CSI_DATA23
ALT4: EIM_CRE
ALT5: GPIO2_IO07
ALT6: KPP_COL03
ALT7:
ALT8: GPT1_
CAPTURE2
NVCC_
ENET
51 / H21 CPAD51 ENET1_TX_DATA1
ENET1_TX_
DATA1
ALT0: ENET1_TDATA01
ALT1: UART6_CTS_B
ALT2: PWM5_OUT
ALT3: CSI_DATA20
ALT4: ENET2_MDIO
ALT5: GPIO2_IO04
ALT6: KPP_ROW02
ALT7:
ALT8: WDOG1_WDOG_
RST_B_DEB
NVCC_
ENET
52 / G21 CPAD52 ENET1_TX_EN
ENET1_TX_
EN
ALT0: ENET1_TX_EN
ALT1: UART6_RTS_B
ALT2: PWM6_OUT
ALT3: CSI_DATA21
ALT4: ENET2_MDC
ALT5: GPIO2_IO05
ALT6: KPP_COL02
ALT7:
ALT8: WDOG2_WDOG_
RST_B_DEB
NVCC_
ENET