User Manual
Table Of Contents
- About the ConnectCore® 6UL
- Module specifications
- Assembly instructions
- Moisture sensitivity and shelf life
- Mounting
- Solder paste print
- Stencil
- Coplanarity
- SMT pick and place
- SMT process parameter reference - for both castellation and LGA applications
- Reflow profiles using a ten-zone oven, SAC 305 lead-free solder paste (Alpha ...
- Vapor Phase Profile Recommendation Using IBL 309 Batch Soldering Machine, SAC...
- Vapor Phase IBL 309 batch soldering machine settings
- Conformal coating
- Certifications
ConnectCore® 6UL Hardware Reference Manual 71
LGA
pad
ConnectCore
6UL pad
ConnectCore 6UL
signal name
i.MX6UL
pad name Multiplexing Power group Comments
D16 LGA_D16 BT_UART1_CTS#
UART1_
CTS_B
ALT0: UART1_CTS_B
ALT1: ENET1_RX_
CLK
ALT2: USDHC1_WP
ALT3: CSI_DATA04
ALT4: ENET2_1588_
EVENT1_IN
ALT5: GPIO1_IO18
ALT6:
ALT7:
ALT8: USDHC2_WP
NVCC_UART Signal only available on module without
Bluetooth functionality.
D17 LGA_D17 BT_UART1_TX
UART1_TX_
DATA
ALT0: UART1_TX
ALT1: ENET1_
RDATA02
ALT2: I2C3_SCL
ALT3: CSI_DATA02
ALT4: GPT1_
COMPARE1
ALT5: GPIO1_IO16
ALT6:
ALT7:
ALT8: SPDIF_OUT
NVCC_UART Signal only available on module without
Bluetooth functionality.
D18 LGA_D18 BT_UART1_RX
UART1_RX_
DATA
ALT0: UART1_RX
ALT1: ENET1_
RDATA03
ALT2: I2C3_SDA
ALT3: CSI_DATA03
ALT4: GPT1_CLK
ALT5: GPIO1_IO17
ALT6:
ALT7:
ALT8: SPDIF_IN
NVCC_UART Signal only available on module without
Bluetooth functionality.