User Manual
Table Of Contents
- About the ConnectCore® 6UL
- Module specifications
- Assembly instructions
- Moisture sensitivity and shelf life
- Mounting
- Solder paste print
- Stencil
- Coplanarity
- SMT pick and place
- SMT process parameter reference - for both castellation and LGA applications
- Reflow profiles using a ten-zone oven, SAC 305 lead-free solder paste (Alpha ...
- Vapor Phase Profile Recommendation Using IBL 309 Batch Soldering Machine, SAC...
- Vapor Phase IBL 309 batch soldering machine settings
- Conformal coating
- Certifications
ConnectCore® 6UL Hardware Reference Manual 72
LGA
pad
ConnectCore
6UL pad
ConnectCore 6UL
signal name
i.MX6UL
pad name Multiplexing Power group Comments
D19 LGA_D19 BT_UART1_RTS#
UART1_
RTS_B
ALT0: UART1_RTS_B
ALT1: ENET1_TX_ER
ALT2: USDHC1_CD_
B
ALT3: CSI_DATA05
ALT4: ENET2_1588_
EVENT1_OUT
ALT5: GPIO1_IO19
ALT6:
ALT7:
ALT8: USDHC2_CD_
B
NVCC_UART Signal only available on module without
Bluetooth functionality.
D20 LGA_D20 PCM_IN
-
VDDIO_GPIO1
D21
LGA_ D21
ENET1_TX_DATA0
ENET1_TX_
DATA0
ALT0: ENET1_
TDATA00
ALT1: UART5_CTS_B
ALT2: ANATOP_
24M_OUT
ALT3: CSI_DATA19
ALT4: FLEXCAN2_RX
ALT5: GPIO2_IO03
ALT6: KPP_COL01
ALT7:
ALT8: USDHC2_
VSELECT
NVCC_ENET
E1
LGA_ E1
LDOG
-
LDOG PMIC output (Front-end LDO)
E2 LGA_E2 -
-
- -
E3 LGA_E3 3V3_INT
-
3V3_INT Power line (PMIC SW1A output)