User Manual
Table Of Contents
- About the ConnectCore® 6UL
- Module specifications
- Assembly instructions
- Moisture sensitivity and shelf life
- Mounting
- Solder paste print
- Stencil
- Coplanarity
- SMT pick and place
- SMT process parameter reference - for both castellation and LGA applications
- Reflow profiles using a ten-zone oven, SAC 305 lead-free solder paste (Alpha ...
- Vapor Phase Profile Recommendation Using IBL 309 Batch Soldering Machine, SAC...
- Vapor Phase IBL 309 batch soldering machine settings
- Conformal coating
- Certifications
ConnectCore® 6UL Hardware Reference Manual 91
LGA
pad
ConnectCore
6UL pad
ConnectCore 6UL
signal name
i.MX6UL
pad name Multiplexing Power group Comments
U21
LGA_ U21
JTAG_nTRST
JTAG_
TRST_B
ALT0: SJC_TRSTB
ALT1: GPT2_
COMPARE3
ALT2: SAI2_TX_DATA
ALT3:
ALT4: PWM8_OUT
ALT5: GPIO1_IO15
ALT6: ANATOP_
24M_OUT
ALT7:
ALT8:CAAM_RNG_
OSC_OBS
NVCC_GPIO
V1
LGA_ V1
CSI_HSYNC
CSI_HSYNC
ALT0: CSI_HSYNC
ALT1: USDHC2_CMD
ALT2: SIM1_PORT1_
PD
ALT3: I2C2_SCL
ALT4: EIM_LBA_B
ALT5: GPIO4_IO20
ALT6: PWM8_OUT
ALT7:
ALT8: UART6_CTS_B
NVCC_CSI
V2 LGA_V2 GND
-
-
V3 LGA_V3 BOOT_MODE0
BOOT_
MODE0
VDD_SNVS_IN 100K pull-down resistor
V4 LGA_V4 GND
-
-
V5 LGA_V5 (VDD_SNVS_IN)
GPIO5_2
SNVS_
TAMPER2
ALT5: GPIO05_IO02 VDD_SNVS_IN