Owner's Manual

Rear Panel

1 2 3 4 5

1. Input

Connect your instrument to this high-impedance TS input.

2. Amp / Mixer

This button optimizes the BP90’s outputs for use when plugged into a bass amp or a mixer/

recording device. When set to Mixer (“In” position), the outputs are optimized for con-

necting to a mixer, recording device or headphones. When set to Amp (“Out” position), the

outputs are optimized for running directly in to the input of a bass amp.

3. Left (Mono) and Right Outputs

Connect the Left (Mono) output to the input of a single amplifier (or mixer input) for mono

operation. Connect the Left and Right outputs to the inputs of 2 amplifiers (or 2 mixer

channels) for stereo operation.