Owner's Manual
WARNING FOR YOUR PROTECTION
PLEASE READ THE FOLLOWING:
KEEP THESE INSTRUCTIONS
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING LIQUID 
AND NO OBJECT FILLED WITH LIQUID, SUCH AS VASES, SHALL BE PLACED 
ON THE APPARATUS.
CLEAN ONLY WITH A DRY CLOTH.
DO NOT BLOCK ANY OF THE VENTILATION OPENINGS. INSTALL IN ACCORDANCE 
WITH THE MANUFACTURER’S INSTRUCTIONS.
DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT 
REGISTERS, STOVES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT 
PRODUCE HEAT.
ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER.
UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR 
LONG PERIODS OF TIME.
Do not defeat the safety purpose of the polarized or grounding-type plug. A 
polarized plug has two blades with one wider than the other. A grounding 
type plug has two blades and a third grounding prong. The wide blade or 
third prong are provided for your safety. If the provided plug does not fit 
your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at 
plugs, convenience receptacles, and the point where they exit from the 
apparatus.
Use only with the cart stand, tripod bracket, or table specified by the manu-
facture, or sold with the apparatus. When a cart is used, use caution when 
moving the cart/apparatus combination to avoid injury from tip-over.
Refer all servicing to to qualified service personnel. Servicing is required 
when the apparatus has been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped.
POWER ON/OFF SWITCH: The Power switch used in this piece of equipment 
DOES NOT break the connection from the mains.
MAINS DISCONNECT: The plug shall remain readily operable. For rack-mount 
or installation where plug is not accessible, an all-pole mains switch with a 
contact separation of at least 3 mm in each pole shall be incorporated into 
the electrical installation of the rack or building.
The symbols shown above are internationally accepted symbols that warn of potential hazards with electri-
cal products. The lightning flash with arrowpoint in an equilateral triangle means that there are dangerous 
voltages present within the unit. The exclamation point in an equilateral triangle indicates that it is necessary 
for the user to refer to the owner’s manual.
These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not 
attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any 
reason will void the manufacturer’s warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it 
off immediately and take it to a dealer for service. Disconnect the unit during storms to prevent damage.
ELECTROMAGNETIC COMPATIBILITY 
This device complies with part 15 of the FCC Rules and the Product Specifications noted on the 
Declaration of Conformity. Operation is subject to the following two conditions:
•  this device may not cause harmful interference, and 
•  this device must accept any interference received, including interference that may cause 
undesired operation. 
Operation of this unit within significant electromagnetic fields should be avoided.
• use only shielded interconnecting cables.
If you want to  dispose this product,  do not mix it  with general household waste.   There is a 
separate  collection  system  for  used  electronic  products  in  accordance  with  legislation  that 
requires proper treatment, recovery and recycling.
Private household  in the  25 member  states of  the EU,  in Switzerland  and Norway may return their  used 
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar 
new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and 
recycling and thus prevent potential negative effects on the environment and human health.










