User's Manual

nect the cable from the Input 1 (Mono) jack when not in use. If the

optional Harman PS200R power supply is used, cables can remain

connected.

Input 2 - Connect a second input to this jack for stereo operation.

Input 1 and 2 are processed separately through the stereo delay

effect and then fed to Outputs 1 and 2 to keep true stereo separa-

tion between channels.

Foot Switch Release Pins - These two pins are spring loaded

hinges that hold the Foot Switch in place. See page 16 for informa-

tion on accessing and changing the battery. See page 12 for more

information on using and changing the Tails Switch settings.

Indicator LED - Lights when the effect is turned on. When bat-

tery power is low (approximately 15 minutes before it dies), the

Indicator LED begins to dim giving you advanced warning that very

shortly you will need to replace the battery.