User's Manual

Foot Switch - Turns the effect on and off. The Foot Switch is also

used for tapping in the delay time when using the Tap Tempo delay

feature and for arming the Loop recording when the LOOP type is

selected.

Output 1 (Mono) - Connect this output to the input of a single

guitar amplifier, another pedal input, or amp effects return.

Output 2 - Connect this output to the input of a second guitar

amplifier when a second amp is being used. When only the Input 1

(Mono) is connected and both Output 1 and Output 2 are used, all

delays except for MODULATED, SLAPBACK, REVERSE and LOOP

act as ping pong delays, meaning repeats alternate equally back and

forth between Output 1 and Output 2.

Note: Use unbalanced mono instrument cables only.

10.

11.

12.