Owner's Manual

5
4. Display
In Tuner mode this displays the note played on the guitar. In Setup
Menu it is used to display the current value of the various parameters.
5. 

Flat/Sharp Tuner LEDs
These LEDs light when using the Guitar Tuner to show what note
is being played (example: F#).
6. Harmony Patch Number
This indicates which of the five Harmony Patches is presently
selected. Note that each Harmony Patch has two harmony set-
tings: Part A and Part B.
7. EQ
A two band EQ allows the tone of the input vocal to be adjusted.
The Low EQ knob controls the cut/boost of the bass frequencies.
The High EQ knob controls the cut/boost of the treble frequencies.
8. Compressor
Adjusts the amount of compression or dynamic range on the
lead voice.
9. Warmth
This controls the warmth of the vocal by emulating a tube preamp.
10. Pitch Correct
This knob adjusts the amount of the chromatic pitch correction
on the lead voice. The Enable button is used to turn pitch correc-
tion on and off. When the Enable button is lit, Pitch Correct is
on and active in the signal path. When the button is not lit, Pitch
Correct is bypassed.
11. Guitar Mix
This knob adjusts the amount of guitar signal that is present in
the output mix. The Chorus button enables and disables a cho-
rus effect for the guitar signal. The Reverb button enables and
disables the guitar signal from being routed through the reverb.