Owner's Manual

6. Input 1 (Mono) - Connect your instrument, the output of a pedal, or

an amp effects send to this jack. When only a single input is needed, this

jack must be used. Signals will still be heard at both outputs when only

the Input 1 (Mono) jack is connected. Connecting a guitar cable to the

Input 1(Mono) jack supplies battery power even though the Indicator

LED may not be lit. To prolong battery life, disconnect all cables from

the pedal when not in use. If the optional power supply is used for

power, the input can remain connected.

7. Input 2 - Connect a second pedal’s output to this jack for stereo

operation. Inputs 1 and 2 are fed through the stereo Tremolo/Rotary

effects and then to Outputs 1 and 2 and will keep true stereo

separation between channels. NOTE: When the Rotary type is

selected and the effect is on, this input is summed with Input 1 and

then fed through the Rotary effect.