User`s guide

Configure Outlets
Chapter 9 Digi Remote Power Manager (Digi RPM) 93
Configure Outlets
Next, configure the PortServer TS to link serial ports to outlets on the Digi
RPM. From each outlet on the Digi RPM, you can set a name for it, tie its
use to a serial port, and control user access to the outlet for power
management.
1. On the Port Profile page, click Controller Outlets. A list of other Digi
RPM power controller’s outlets is displayed, along with a summary of
each outlet’s current configuration. The number of outlets displayed is
the same as the value entered for Outlets on the Controller Settings
page.
2. You can either edit outlet settings or clear them.
• To edit the settings of a power outlet, click on that outlet's link under
the Outlet or Device Name heading.
• To clear the settings of a power outlet, click on Unplug Device...
under the Action heading, and confirm that you want to clear the
settings.