User Manual

38 Chapter 8 Configuring Autoconnection
5. Choose UDP serial... at the bottom of the page. The UDP Serial Config-
uration page is displayed.
6. Fill in the requested information and choose Add destination at the bot-
tom of the page.
See the Help section for additional information on the settings.
7. Scroll to the bottom of the page. Under Description, choose upddest1.
8. Enter the requested information and choose Submit.
You can change the Description as desired. The IP address is the desti-
nation device server’s address and the UDP port uses a base socket
number of 2100 for UDP. The first port would be port number 2101.
9. Repeat these steps until you have added the necessary destinations.
Procedure for Configuring Inbound Socket Communication
1. Access the web interface by entering the Digi One/PortServer TS IP
address in a browser’s URL window.
2. Log on to the Digi One/PortServer TS as root. The default password is
dbps.
3. From the main menu, choose Configure > Port.