User Manual

8 Chapter 1 Introduction

Step F: Configure Other Features as Required

See the following for information on setting up other features:

• "Configuring PPP" on page 29

• "Configuring Autoconnection" on page 35

• "Configuring IP Routing" on page 41

• "Configuring Security Features" on page 47

• "Configuring DNS" on page 55

About Entering Commands on the Command Line

If you use the command line, you will find the commands needed within

each chapter. For detail such as syntax, parameters, range, variables, or

applications see the Digi One/PortServer TS Command Reference found

on the Access Resource CD.

Supported Devices

This manual provides information on the following Digi devices:

• PortServer TS 8

• PortServer TS 16

About This Guide

Purpose

This guide provides the following:

• Configuration and administration procedures

• Configuration examples

Audience

This manual is intended for the person responsible for configuring and

administering device server. It assumes that this person has experience

configuring network devices and is familiar with networking concepts.

Scope

This manual provides step-by-step instructions for configuring and

administering device server’s main features. It does not address how to

configure every option, provide complete information on commands, or

discuss hardware installation. These topics are covered in other

documents in the device server library.