Spec Sheet

The Digi One SP device server allows any device with a serial port to easily connect to the
Ethernet. Its compact design delivers cost-effective performance and capability in one of the
smallest form factors available.
Part of Digi’s broad device server offering, the Digi One SP delivers standard serial-to-
Ethernet connectivity and is ideal for serial tunneling or applications where COM ports,
TCP Socket, UDP Socket, or UDP Multicast functionality is needed. Serial tunneling allows
two previously non-networked and isolated devices to easily communicate information and
operate with existing installed software applications on an Ethernet network, eliminating
the long serial cable. The Digi One SP also works with software applications using
TCP/UDP Sockets, allowing a serial device to interoperate with the software applications
without the need to install a driver.
The Digi One SP is easy to install locally or remotely through a variety of IP addressing
methods, including DHCP, RARP, and ARP-Ping. Included on the installation CD is an
application that will automatically detect all Digi One SP devices on your network. A
quick-start guide is also provided to make network configuration easy and hassle-free.
Digi International, the leader in Connectware, makes device networking
easy by developing products and technologies that are cost-effective and
easy to use. With over 20 million ports shipped worldwide, Digi has
been offering the highest levels of performance, flexibility, and quality
since 1985.
Product Data Sheet
Overview
The Digi One SP device server is
designed for standard serial-to-Ethernet
connectivity. It is ideal for applications
requiring simple and easy-to-use data
communications.
Features/Benefits
Information
Management
System
Ethernet
Handheld
Scanner
Digi One SP
EIA-232/422/485
Digi One
TM
SP
Device Server
www.digi.com
Connectware
™
®
> Easy configuration using
installation CD
> Patented Digi RealPort
®
technology for COM or TTY
port control and management
> TCP/UDP Socket Services for
broad device connectivity and
application use
> Auto-connect the serial device
to networked server using raw,
Telnet, Rlogin
> Reverse Telnet for easy access
of serial devices from network
> Easy configuration through
Web interface (HTTP)
> Switch selectable
EIA-232/422/485 for simple
interfacing to any type of serial
device
> Modem emulation allows
support for devices
designed only for modem
communications