User`s manual

107
clear_message_events
Removes all message events from the gateway’s Messaging client cluster’s list of
events. Events are still active on the server and may be resent or requested to be resent
by the client using get_last_message_event command (see get_last_message_event on
page 106).
Parameter Type Description
source_endpoint_id
(optional)
int 8-bit identifier of the endpoin
t on the gateway hosting
the Messaging client cluster. Defaults to the 
standard SE endpoint (0x5E).
Parameter Type Description
source_endpoint_id int 8-bit identifier of the endpoint on the gateway hosting
th
e Messaging client cluster.
cluster_id int 16-bit identifier of the cluste
r from which the message
command was sent.
clear_message_events Parameters:
clear_message_events_response Parameters:
cluster_id int 16-bit identifier of the cluster from which the message
command was sent.
record (optional) MessageConfirmationRecord Specified the message ID for the message event or
ca
ncel message event being confirmed. Only include
if record is specified in the original confirm_message
command (See “MessageConfirmationRecord” on
page 129.)
device_list list List of all devices to which the confirmation was sent.
Wil
l be empty if status is not success (0x00).
item - M
AC - 64-bit extended address of a
device to which the cancel was sent.
Parameter Type Description