User`s manual

STA R TU P SEQUENCE

The following operations are performed in order by the gateway when powered on.

1. Core modules are imported and core objects are initialized. The gateway will then

load the modules and objects specified in the configuration files (see “Global Saved

Files” on page 48). All RPC requests are now registered and available for use. Be

aware that some RPC requests require time to be synchronized and / or the gateway

to be joined to a network and may return errors.

2. If enabled, the gateway synchronizes time with an NTP server (see “Registry” on

page 45). By default, the ESI coordinator and ESI router will enable NTP; however,

the Aux Gateway will try to set its time using the ZCL time client cluster after it has

joined the network.

3. The gateway waits for its XBee radio to report that it is joined to a network. Until the

radio reports that it is joined to a network, all outgoing ZigBee messages will return an

error.

4. The gateway is fully operational.