User`s manual

Parameter Type Description
device_address MAC 64-bit extended address of the remote device to be removed.
Parameter Type Description
device_address MAC 64-bit extended address of the remote device that was removed.
74
remove_device Parameters:
remove_device_response Parameters:
enable_joining
Enables node joining on the network for the specified number of seconds. If 0, node
joining will immediately be disabled.
Parameter Type Description
join_time int Number of seconds for which node joining w
ill be enabled on the network.
Parameter Type Description
join_time int Number of seconds for which node joining w
ill be enabled on the network.
enable_joining Parameters:
enable_joining_response Parameters:
refresh_device_information
Initiates a periodic refresh immediately. This command can also initiate a full refresh for
existing devices. A full refresh updates all known information such as endpoints, clusters,
power and node descriptors, etc. (See “Periodic Refresh” on page 43)
Parameter Type Description
device_address
(optional)
MAC If provided, then will only refresh specified device. D
efaults to a broadcast
for all devices.
full_refresh
(optional)
bool If TRUE, then perform a full refresh. If FALSE, then perform a standard peri-
odic refresh. Defaults to FALSE.
refresh_device_information Parameters:
get_device_information
Returns all known information about devices on the network.