Specifications

28 DC-782 Operation Manual
6.5 Delete Item Memory
The DC-782 allows you to delete individual items from memory.
The following procedure describes the steps used
to delete a single specific Item Code together will all of its
associated information (tare weight, unit weight, and set point).
1. Press MODE key twice to
enter the Programming Mode. The scale display will show ProG.
2. Enter the Item Code you wish to delete
(the Item Code will appear in the Unit Weight display). If the
Item Code you entered does not exist in memory, the scale will beep twice to indicate that this operation
is not available.
3. Press the - (MINUS) key to del
ete the item. The display will show Clear, asking you to confirm that you
want to delete or clear this item from memory.
4. To complete the deletion of this item and all of its data, press the CLEAR key
, or press the MODE key to
cancel the deletion. If you pressed the CLEAR key, the Item Code will be deleted and the scale will
return to the Programming Mode screen.
5. To return to the Weighing Mode, press the MODE key
once.