Installation manual
Table Of Contents
- About This Manual
- 1.0 Introduction
- 2.0 Installation
- 3.0 Scale Setup
- 4.0 Configuration Settings
- 5.0 Calibration
- 6.0 Scale Operations
- 7.0 Scale Programming
- 8.0 RS-232 Specifications
- 9.0 PC Connections and Label Formatting
- 10.0 Appendix
- 10.1 SPEC Code Worksheets
- 10.2 Scale Capacity and Display Resolution
- 10.3 Connector Pinouts
- 10.4 Cable Wiring
- 10.5 Y-Cable Wiring Diagram
- 10.6 DC-190 Messages
- 10.7 Clearing Locked-Up Scale (888888 Error)
- 10.8 DC-190 Character Code List (Teraoka Code)
- 10.9 Bar Code Board
- 10.10 PSC QuickScan 6000 Setup
- 10.11 DC-190 Ultra Count Specifications
- DC-190 Ultra Count Limited Warranty
54 DC-190 Ultra Count Installation Manual
10.4 Cable Wiring
The following tables show wiring specifications for cables used with the Epson TM-U295/TM-U200, Eltron
2722/2742, and Digi BCP-300 printers.
10.4.1 TM-U295/TM-U200 Cables
Cable PN 41279
Cable PN 32810
10.4.2 Eltron 2722/2742 Cables
Cable PN 64660
Cable PN 64661
10.4.3 BCP-300 Cable
Cable PN 73106
TM-U295/TM-U200
25-pin D-Sub Male
DC-190
9-pin D-Sub Male
Function Pin Pin Function
TxD 2 2 RxD
RxD 3 3 TxD
GND 7 5 GND
NOTE: When making your own cable, short the following pins:
25-pin D-Sub: Pin 6 (DSR) to 20 (DTR), 4 (RTS) to 5 (CTS)
9-pin D-Sub: Pin 4 (DTR) to 6 (DSR), 7 (RTS) to 8 (CTS)
Table 10-10. Wiring for Cable PN 41279,
TM-U295/TM-U200
TM-U295/TM-U200
25-pin D-Sub Male
DC-190
8-pin DIN Male
Function Pin Pin Function
TxD 2 4 RxD
RxD 3 5 TxD
GND 7 2 GND
NOTE: When making your own cable, short the following pins:
25-pin D-Sub: Pin 6 (DSR) to 20 (DTR), 4 (RTS) to 5 (CTS)
8-pin DIN: Pin 1 (DTR) to 3 (DSR), 6 (CTS) to 7 (RTS)
Table 10-11. Wiring for Cable PN 32810,
TM-U295/TM-U200
Eltron 2722/2742
9-pin D-Sub Male
DC-190
9-pin D-Sub Male
Function Pin Pin Function
RxD 3 3 TxD
GND 5 5 GND
RTS 7 7RTS
CTS 8 8 CTS
Table 10-12. Wiring for Cable PN 64660, Eltron 2722/2742
Eltron 2722/2742
9-pin D-Sub Male
DC-190
8-pin DIN Male
Function Pin Pin Function
RxD 3 5 TxD
GND 5 2 GND
RTS 7 7RTS
CTS 8 6 CTS
Table 10-13. Wiring for Cable PN 64661, Eltron 2722/2742
BCP-300
RJ-11
Wire Color
DC-190
8-pin DIN Male
Pin Pin
1 White 1
2 Black 2
3 Red 3
4Green 4
5Yellow 5
6 Blue 6
—— 7
—— 8
Table 10-14. Wiring for Cable PN 73106, Digi BCP-300