Installation guide

135
Options [snmpv1v2c options]
snmpv1v2_enabled={off|on}
Enables or disables the accessing of SNMP-managed objects through
SNMP v1/v2c protocol.
off
Disables the accessing of SNMP-managed objects through SNMP
v1/v2c protocol.
on
Enables the accessing of SNMP- managed objects through SNMP
v1/v2c protocol.
publiccommunity=string
The password required to “get” SNMP-managed objects(v1/v2c). The
default is “public”.
privatecommunity=string
The password required to “set” SNMP-managed objects(v1/v2c). The
default is “private”.
snmpv1v2_permission={get_only|get_set}
Allow SNMP clients to set device settings through SNMP (v1/v2c).
get_only
Disabled the capability for users to issue SNMP “set” commands uses
use of SNMP read-only for the ConnectPort LTS product.
get_set
Enabled the capability for users to issue SNMP “set” commands uses
use of SNMP read-only for the ConnectPort LTS product.