Installation guide

19
close
Purpose Closes active connect, Rlogin, and Telnet sessions; that is, sessions opened by
“connect,” “rlogin,” or “telnet” commands.
The “close” command is associated with the sessions displayed by the“status”
command.
A “close” command issued without any options closes the current connection.
To issue the “close” command, you must first escape the active session. Do
this by pressing the escape key defined for your session type. The following
table lists default escape keys.
Session Type
Default Escape Keys
Connect
Ctrl+[+Enter
Rlogin
~+Enter
Telnet
Ctrl+]+Enter
For ConnectPort LTS, use the command “z suspend telnet” to escape the
active Telnet session instead of “e exit telnet”. Using the latter command to
exit the Telnet session causes the session to be closed automatically and there
will be no session to close using “close” command. See the "telnet” command
description for details on connecting and closing Telnet connections.
Syntax close [{*|connection number}]