Installation guide

61
Syntax Configure port buffering
set buffer [clear] [clearbk]
[port={range|xbee|internalmodem}]
[size=number]
[state={on|off|pause}]
[autobk=(none|nfs|samba|sdmemory|usb)]
[autobk_size=0-64]
[syslog state={off|on}]
Display port buffering settings
set buffer [port=port]
Options clear
Clears the contents of the specified buffer.
clearbk
Clears the autobackup file
port
The port or ports to which the command applies. To configure settings for
the XBee port, specify port=xbee. And to configure settings for an internal
modem port, specify “port=internalmodem.”
size
The size in kilobytes to configure the buffer. Settings are configurable in 2-
kilobyte increments. The maximum size is 64 kilobytes. The default is 32
kilobytes.
state
The buffering state, which can be any of the following:
on
The data will be buffered.
off
The data will not be buffered and all data will be cleared from
the buffer.
pause
The data will not be buffered, but data in the buffer will not
be cleared.