Installation guide

85
[s-sysauth={none|read|rw}]
[s-system={none|read|rw}]
[s-tcpserial={none|r-self|read|rw-self|
w-self-r|rw}]
[s-trace={none|read|rw}]
[s-udpserial={none|r-self|read|rw-self|
w-self-r|rw}]
[s-usb={none|read|rw}]
[s-user={none|read|rw}]
[s-webui={none|read|rw}]
[s-xbee={none|read|rw}]
Display current network configuration options
set permissions
Options Permission descriptions
Here are the user permissions and their effects on commands.
none
The command cannot be executed.
execute
The command can be executed.
r-self
The user can execute the "display" portions for both commands
if the user is logged in on the specified line.
read
The user can execute the "display" and "set" portions for both
commands if the user is logged in on the specified line.
w-self-r
The user can execute the "display" portions for both commands
for any line and the "set" portions for both commands if the
user is logged in on the specified line.
rw
The user can execute the "display" and "set" portions for both
commands for any line.
type={user|group}
Specifies whether the command applies to users or groups. This option
defaults to “user.”