Installation guide

timeout =0-300

The timeout (specified in seconds) controls how long the ConnectPort LTS

will wait for the response from Radius authentication server. Factory

default value is 10.

retries =1-50

The retries controls how many time the ConnectPort LTS will try to

communicate with the Radius authentication server. Factory default value

is 3.

searchbase =string

LDAP search base (the distinguished name of the search base object)

defines the location in the directory from which the LDAP search begins.

domainname ={hostname|ip address}

If the LDAP database resides on a Microsoft system, the Domain name for

the active directory must be configured on this option. If using a non-

Microsoft system, do not use this setting, as it changes the LDAP to

comply with Microsoft syntax.

ldapsecopt ={off|start_tls}

Security option for LDAP authentication. If “start_tls” is selected, the

StartTLS extended operation is used to secure the communication between

ConnectPort LTS and the LDAP Server.

ppp_user=string

For inbound PPP connections, this option is the inbound PPP user.

Example #> set portauth port=1 authmethod=radius

primary_authsvr=192.1681.1 secret=teststring